Product ID:3-AMINOBENZAMIDE, A0788
MSDS Date:08/01/1989
FSC:6810
NIIN:00N057736
MSDS Number: BWYTV

Emergency Phone: 800-325-3010

Info Phone: 314-771-5765

Cage: 21076

Telephone: 314-771-5765

Cage: 21076

BENZAMIDE, M-AMINO-

CAS: 3544-24-9

RTECS: CU8992000

OSHA PEL N/K

ACGIH TLV: N/K

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:CAUSES EYE & SKIN IRRIT. MATL IS IRRIT
TO MUC MEMB & UPPER RESP TRACT.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:EYES: IMMED FLUSH W/COPIOUS AMTS OF WATER FOR AT LEAST 15
MINS. SKIN: IMMED WASH W/SOAP & COPIOUS AMTS OF WATER. INHAL:
REMOVE TO FRESH AIR. IF NOT BREATHING, GIVE ARTF RESP. IF BRTHG IS
DFCLT, GIVE O *2. CALL MD. WASH CONTAMD CLTHG BEFORE REUSE.

Extinguishing Media:WATER SPRAY. CARBON DIOXIDE, DRY CHEM POWDER,
ALCOHOL/POLYMER FOAM.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT.
Unusual Fire/Explosion Hazard:PREVENT CONTACT W/SKIN & EYES.

Spill Release Procedures:WEAR NIOSH/MSHA APPRVD SCBA, RUBBER BOOTS &
HEAVY RUBBER GLOVES. SWEEP UP, PLACE IN BAG & HOLD FOR WASTE DISP.
AVOID RAISING DUST. VENT AREA & WASH SPILL SITE AFTER MATL PICKUP
IS COMPLETE.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:KEEP TIGHTLY CLOSED. STORE IN A COOL
DRY PLACE.
Other Precautions:AVOID CONTACT & INHALATION. DO NOT GET IN EYES, ON
SKIN, ON CLTHG. IRRITANT.

Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR.
Ventilation:MECHANICAL EXHAUST REQUIRED.
Protective Gloves:RUBBER GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES.
Other Protective Equipment:SAFETY SHOWER & EYE BATH.
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Melt/Freeze Pt:M.P/F.P Text:>239F,>115C
Appearance and Odor:OFF-WHITE POWDER.

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:TOXIC FUMES OF CARBON MONOXIDE, CARBON
DIOXIDE, NITROGEN OXIDES.

Waste Disposal Methods:DISSOLVE OR MIX THE MATL W/COMBUSTIBLE SOLVENT &
BURN IN A CHEMICAL INCINERATOR EQUIPPED W/AN AFTER BURNER &
SCRUBBER. OBSERVE ALL FEDERAL, STATE & LOCAL LAWS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.